Steps to drill concrete core in Tuyen Binh

23/04/2020 Lượt xem: 131

Step 1:  You need to locate the concrete core drilling hole

This is a very important step to help you drill the right position. To drill properly, you should mark the center with a wet ink in a cross shape. In addition, before drilling, it is necessary to have the inspection and certification of the person in charge of the construction structure.

Step 2: Make sure the base is firm

You should use a screwdriver to hold the stand steady. If the drilling site position is rough, then we use anti-channel bolts so that the base can be balanced again.

khoan cắt bê tông long an

Step 3: Install and fix a concrete core drilling rig in Tuyen Binh

After the stand has been fixed, you proceed to install the machine and the drill, note that you must position the center of the hole. The drill base will be tightened with bolts after the drill has been positioned in the center of the hole.

Step 4: Finally, concrete core drilling and khoan cắt bê tông Long An

You should drill slowly on the rails. When you see the concrete core drill drill about 2cm deep, proceed to press lightly to drill the concrete core.

Bài viết liên quan